The R22 PRO is the right mini excavator for jobs where a small-class machine is no longer up to the task, but a wheeled excavator is too big and too expensive to move. It digs foundations and basements, opens trenches for water mains, sewerage and cables, cleans and reshapes ditches, loads soil and rubble, and prepares pads before concrete is poured.
What sets it apart from machines in the same class is the power unit: a Kubota D1105 diesel with three cylinders and water cooling, Euro 5 certified — a widely used engine with spare parts and service available, low fuel consumption and steady torque even under continuous load. The hydraulic system, with a load-sensing variable-displacement piston pump, maintains breakout force without losing speed when you use the boom and swing at the same time, and the nine-section control valve allows hydraulic attachments to be fitted without modifications.
The chassis with tracks extendable from 1,300 to 1,500 mm is the practical, everyday advantage: you get through a 1.3 m opening between fences, walls and yard gates, then extend the tracks on open ground for stability when digging deep and lifting. The 1,300 mm dozer blade stays on the machine, so you do not need a second machine for levelling and backfilling. At 2,371.5 kg in working order, it can be transported on an ordinary company trailer, with no special permits.
It is a solid choice for small construction and utility installation firms working in built-up areas, for farms that maintain their own access roads, drainage and feed yards, and for equipment rental businesses that need a machine that is tough, easy to operate and cheap to maintain.
Standard equipment
- 450 mm toothed bucket fitted at the factory
- Kubota D1105 diesel engine, 3 cylinders, water-cooled, Euro 5 certified
- Hydraulically extendable tracks, 1,300–1,500 mm
- 1,300 mm front dozer blade
- 9-section hydraulic control valve, ready for attachments
- Digital display showing operating parameters in real time
The machine at work
Specifications
| Engine | |
|---|---|
| Engine make and model | Kubota D1105 |
| Max. power | 24.75 hp |
| Displacement | 1.123 l |
| Number of cylinders | 3 |
| Cooling | Water-cooled |
| Fuel | Diesel |
| Emission standard | Euro 5 |
| Average fuel consumption | 1.3–1.5 l/h |
| Performance | |
|---|---|
| Weight class | 2–3 t |
| Operating weight | 2,439 kg |
| Bucket capacity | 0.054 m³ |
| Max. digging depth | 2,293 mm |
| Max. digging reach | 4,143 mm |
| Max. digging height | 3,761 mm |
| Max. dump height | 2,496 mm |
| Max. digging force | 18.4 kN |
| Max. hydraulic flow | 67.2 l/min |
| Hydraulic working pressure | 20 MPa |
| Travel speed | 0–1.5 / 0–2.8 km/h |
| Max. gradeability | 30 % |
| Ground pressure | 33.4 kPa |
| Dimensions | |
|---|---|
| Bucket width | 450 mm |
| Boom length | 1,830 mm |
| Ground clearance | 510 mm |
| Blade width | 1,300 mm |
| Transport | |
|---|---|
| Transport width | 1,300 mm |
| Transport height | 2,361 mm |
| Transport weight | 2,439 kg |
| Transport length | 2,824 mm |
| Warranty | |
|---|---|
| Warranty | 36 months / 3,000 h |
| Other specifications | |
|---|---|
| Cab | Heated cab, Cab with air conditioning |
Configure it for your job
Tick what you would like to receive with the machine. We will include it in the quote we send you.
Tick what interests you and request a quote — we will send you the price for the machine and attachments together.
Request a quoteOther Rippa mini excavators
Alternative products
Other products you may be interested in