The RF25E is the last step before moving to a forklift with a large chassis. It takes pallets of floor and wall tiles, wire coils, bulk bags, strapped timber, sheet metal and profiles, drums and heavy packs, and carries them from the truck to the racking or from the press to the dispatch area. It lifts up to 3,000 mm, with 1,070 mm forks and an outer spread adjustable between 800 and 1,000 mm.
Compared with the 2 t version, the gain is in traction and counterweight, not in hydraulic speed: the travel motor goes up to 5,000 W and unladen weight to 2,870 kg, while the lift motor stays at 4,000 W. In practice, it carries 500 kg more and pulls away more firmly with a load on the forks, while keeping the same dimensions — 2,200 mm length without forks, 1,200 mm width, 1,580 mm wheelbase.
It suits high-turnover warehouses, building materials companies and halls where goods arrive on heavy pallets but the aisles are still the ones from ten years ago. Top speed is 12 km/h, max. gradeability 10% and ground clearance 150 mm, and the solid tyres rule out punctures, provided you drive on concrete or asphalt. At 2,870 kg unladen weight plus the load, it is worth checking the load-bearing capacity of the floor, the goods lift and the truck ramp.
The electrical system is 60 V, with maintenance-free 12 V batteries, and control is handled by a Higer controller. As standard: hydraulic power steering, hydraulic brake and handbrake, a one-piece cast steel drive axle and a heavy-gauge sheet steel steering axle, lift cylinders with ground bushings, an overhead guard and full lighting. The catalogue configuration includes a fork side shift.
Standard equipment
- Rated load 2,500 kg at a 500 mm load centre
- Travel motor of 5,000 W, the most powerful among the short-chassis versions
- Hydraulic lift motor of 4,000 W, 60 V electrical system, Higer controller
- Unladen weight 2,870 kg, 270 kg more than the 2,000 kg version
- One-piece cast steel drive axle, heavy-gauge sheet steel steering axle
- Top speed 12 km/h, max. gradeability 10%, ground clearance 150 mm
- Solid tyres, 6.50-10 at the front and 5.00-8 at the rear
Specifications
| Engine | |
|---|---|
| Battery | 60V 75Ah |
| Performance | |
|---|---|
| Travel speed | 12 km/h |
| Max. gradeability | 10 % |
| Lift height | 3,000 mm |
| Rated load | 2,500 kg |
| Dimensions | |
|---|---|
| Ground clearance | 150 mm |
| Turning radius | 2,300 mm |
| Tyres | 6.50-10 |
| Transport | |
|---|---|
| Transport width | 1,200 mm |
| Transport height | 2,130 mm |
| Transport length | 2,200 mm |