This is the class where the loader becomes a production machine: quarries and gravel pits, concrete batching and screening plants, aggregate yards, large farms with silage, waste sites. It lifts up to 5,400 mm measured at the bucket hinge pin and dumps from 4,300 mm, so it loads large tipper trucks and hoppers, not just trailers.
The chassis is articulated, with hydraulic power steering, and the minimum turning radius is 5,800 mm, with a wheelbase of 2,700 mm and a track width of 1,700 mm. The service brake is a disc brake with air assistance, and the parking brake is also a disc brake. The bucket is controlled by joystick, and attachments are changed via the quick coupler system, without laborious dismantling.
It comes with engine options of 85, 92 or 97 kW, Yuchai or Cummins, at 2,400 rpm, with a fixed-shaft gearbox and a hydraulic working pressure of 16 MPa. In the telescopic boom configuration, the boom reaches 5.4 m, which turns the machine from one that only loads into one that can also place material at height.
The standard bucket holds 1.2 m³ and is 2,200 mm wide, with removable pin-on teeth that can be replaced on site. Overall dimensions are 6,500 mm long, 2,100 mm wide and 2,950 mm high, on 16/70-24 tyres. The cab has a reversing camera and can be fitted with air conditioning.
Standard equipment
- Engine options of 85, 92 or 97 kW, Yuchai or Cummins, at 2,400 rpm
- 1.2 m³ bucket, 2,200 mm wide, with removable pin-on teeth
- Rated load 3,000 kg, operating weight 7,300 kg
- Articulated chassis with hydraulic power steering, minimum turning radius 5,800 mm
- Lift height at bucket hinge pin 5,400 mm, dump height 4,300 mm
- Air-assisted disc service brake, disc parking brake
- Quick coupler for attachments, joystick control, reversing camera
